WIND

OPLOSSINGEN IN WEER EN WIND

Er is niets zo onberekenbaar als de wind. Daar weten wij alles van. Daarom kies je bij een complexe mechanische uitdaging voor MechDes. Met een goed ontwerp en de juiste berekeningen trotseert ook jouw constructie de wind met gemak. Van windmolen tot klimmende kraan, MechDes heeft de oplossing.

Direct naar

Meer informatie Onze werkwijze Projecten waar we trots op zijn Veelgestelde vragen

MEER INFORMATIE

Werken met constructies in de wind kent bijzondere factoren. Voordat een constructie gebouwd kan worden is veel voorwerk vereist. Voor ontwerpen in de sector wind maken we veel eigen frequentieberekeningen, naast belangrijke knikberekeningen. Zo komen we erachter bij welke freqentie de constructie optimaal presteert en wanneer we het uitsterste vragen van een ontwerp. Geen zorgen, wij weten hoe dit werkt. Onze engineers maken uitgebreide tekeningen en simulaties om het juiste ontwerp te realiseren. MechDes is de betrouwbare partner bij jouw project. Wij leveren kwaliteit. Altijd.

Kick-off meeting

We invite you to our office in Harderwijk. We go deeper into the initial question to be sure to develop a good product.

CONCEPT ENGINEERING

We combine the knowledge gained from the kick-off meeting and our expertise. We use this to create a first 3D concept. We discuss with you what we are going to build.

BASIC ENGINEERING

We start with engineering on a macro level. We zoom in on the challenges in the project and develop a solid foundation.

DETAIL ENGINEERING

From a solid foundation, details are applied to the design. Everything is calculated and tested.

Projecten waar wij trots op zijn

Projecten

Prinses Marijkesluis

Civil Engineering

Prinses Marijkesluis

Civiel

ShorePower – Storage Reel

Civiel

ShorePower – Storage Reel

Civil Engineering

ShorePower – PowerReach NxG

Civiel

Deep Sea Polymetallic nodule collection

Offshore

Deep Sea Polymetallic nodule collection

Weir gate crane

Civil Engineering

Stuwkraan Linne

Civiel

Lasmachine voor het volautomatisch lassen van veehekken en -poorten

Maakindustrie

Lasmachine voor het volautomatisch lassen van elektriciteitskasten

Maakindustrie

Lasmachine voor het lassen van deurkozijnprofielen en toebehoren

Maakindustrie

Automotive jig voor het lassen van autostoelen

Automotive

Shop towel transportbanden

Machinebouw

Controle berekeningen verhaallieren

Offshore

VEELGESTELDE VRAGEN

What software do you work with?

Within MechDes we have experience with the well-known 3D packages such as; Solid Works, Inventor, Catia, Solid Edge, Siemens NX. We perform FEM calculations in ANSYS Workbench, among others. In addition to the software mentioned above, we also have licenses for 20-sim and ANSYS Discovery. We can provide animations and visualizations in Delfoi, among others. The most suitable software is selected based on the customer’s wishes. In terms of PDM, we have several options. In addition, it is also possible to work remotely on the customer’s systems.
What is your working method?

Within MechDes we have a structured project approach. Each project starts with a kick-off meeting where we preferably invite the customer to our location in Harderwijk to further investigate the initial question and to show the customer where and how we work. Then, based on the request, a start is made with concept, basic or detailed engineering. In each phase, the customer is involved in the engineering, which is concluded with a design freeze meeting.
Do I have a permanent contact person during my project?

Yes. Within a project you are linked to one of our project managers; Arjan Schouten or Dries Vis. Both gentlemen are traditional mechanical constructors, so they have considerable technical knowledge. In addition, within each project there is a lead engineer with technical responsibility. As a customer you are in contact with at least one of the project managers and the lead engineer.
Which partners do you work with?

Many of our customers already have an existing collaboration with various partners. In that case, we are also happy to work with them for, for example, the control or hydraulics. If you as a customer would like advice on this, we as MechDes also have a good network in which we can recommend partners to customers.
Which disciplines does MechDes offer?

Within MechDes we have two main disciplines; Mechanical Engineering and Structural Engineering. Within MechDes there is also sufficient knowledge of other disciplines such as hydraulics and controls to manage parties in projects that have this as expertise. A good example of this is the climbing crane that we designed and calculated for Lagerwey.

STA JE VOOR EEN COMPLEXE UITDAGING?

Wij vinden een oplossing voor elke complexe, mechanische uitdaging. Een oplossing die het verschil maakt. Waarmee kunnen we jou helpen?

Carolina Hoppenbrouwers

Senior Mechanical Engineer

Quickscan

Step 1 of 4 - Step 1

We operate in the sector:(Required)

38164

WIND

OPLOSSINGEN IN WEER EN WIND

Direct naar

MEER INFORMATIE

Projecten waar wij trots op zijn

VEELGESTELDE VRAGEN

What software do you work with?

Is secondment of personnel possible?

What is your working method?

Do you also supply hardware?

Do I have a permanent contact person during my project?

Which partners do you work with?

How do you validate concepts?

Which disciplines does MechDes offer?

In which sectors does MechDes have experience?

STA JE VOOR EEN COMPLEXE UITDAGING?

Carolina Hoppenbrouwers

Quickscan

Kees van Son

WIND

OPLOSSINGEN IN WEER EN WIND

Lees Meer

Direct naar

MEER INFORMATIE

Projecten waar wij trots op zijn

VEELGESTELDE VRAGEN

What software do you work with?

Is secondment of personnel possible?

What is your working method?

Do you also supply hardware?

Do I have a permanent contact person during my project?

Which partners do you work with?

How do you validate concepts?

Which disciplines does MechDes offer?

In which sectors does MechDes have experience?

STA JE VOOR EEN COMPLEXE UITDAGING?

Carolina Hoppenbrouwers

Quickscan

Kees van Son